For manufacturing this cosmetic we will need the following materials:
— fabric for patchwork 3 types, preferably one of the collection;
— adhesive web;
— fabric for the inside;
— self-assembled zipper;
needle — punched filler 150 g;
— water soluble marker;
— , thread the lurex.
1. Have the details wrong side—glue—filler-glue—facial tissue = 5 layers, preparepage iron, glue should not get on the sole of the iron! The diameter of the part here about 13.5 — 14 cm
2. We draw lines to mark: parallel to the bottom, hold one line and the rest will be control by foot, to cover the rhombus with an angle of either 45 or 60 degrees, for angles use the markup ruler.
3. Stitch, I used metallic thread (to replace the needle on the needle for metallic threads), loosen the presser foot pressure on the fabric from the norm by 30%.
4. To cut out the stitches after a diameter of 12.5 cm, if it is not something round, just make the sheet with the compass and draw out.
5. On the bias to cut out the fabric, as pictured, width 3.5 cm, together with an allowance of 6 mm.
6. Pin the bias tape to our items, the half of the circle.
7. With an allowance of 6 mm sew a semi-circle, slowly rotate the workpiece while sewing to ripped stitches was not.
Not sewn items pin, as pictured, to the end and put a mark.
Added to the label 12 mm and cut at an angle of 45 degrees.
Connect the two ends as pictured and sew.
All have the bias tape and pin as pictured, daseven until the end of the circle.
A car passing from the front side seam in a seam, or filed with the underside of the arms.
In the end this should be detail.
8. To cut out strips: flowers height 15 cm width 4 cm, width 5 cm plain
Sew the workpiece:
9. Make a sandwich, use 2 layer of adhesive, up iron.
10. Do parallel lines on a solid colored fabric.
The color inserts do the running stitch, removing the conveyor move the fabric by hands if you do not own a stitch, you can do just quiltagami lines with seams that give a great texture.
11. The workpiece to be cut strictly parallel to the top and bottom.
Do a fitting, jointing edges butt joint (NO overlap). When certainly become extinct, then cut the workpiece.
Exact dimensions can not be due to the different density of stitches, so the workpiece and a change in size.
12. Had turned over piping as pictured, and the workpiece was cut, I used the principle of one-third.
Had turned over inside the slices, and primatal zip.
Did the second part of the zipper, indented from the edges to approximately 6 mm.
13. Determined. For example, I sewed on two zippers, invisible label, needle forward and backward.
Return on the bottom line zipper hemming.
Also from the top.
14. Where lightning connect, we need to do a few stitches in the photo, to nowhere nothing left.
15. Pin edging strip 4 or 4.5 cm, or 5 cm in width, one inside, the other on the other , on the face.
So in the end should look like at this stage.
Sew with a seam allowance of 6 mm if you have more clearance, you can make more margin.
16. Apply to understand.
Folded around the edges as pictured, 1 mm edge should protrude from the front side, he, in the long term, close connection to the underside. Billet-joint. combine the zigzag stitches on the hands.
17. Is bent, as pictured, the edges are folded.
Filed in the hands of the seams in the joints of the edges are laying inside.
18. Take the bottom and sew the cap in the hands of small hidden stitches..
And, photos of the finished work:
Accordingly, it is possible to create such a plan torbicki of any size.
I wish you inspiration and quality time to all who are learning to sew!
Thank you, I will be glad to review.